Chapter 1: Plate Tectonics

The 2nd edition is now available! Click here.

 

 

Learning Objectives

The goals of this chapter are to:

  • Identify types of plate boundaries and compare their characteristic earthquake and volcanic activities
  • Assess the basic lines of evidence supporting plate tectonics
  • Explain how ancient plate boundaries affect modern topography

1.1 Introduction

Plate tectonics is the grand unifying theory in geology. It gets that title because many topics in geology can be explained, in some way, by the movement of tectonic plates. Tectonic plates are composed of Earth’s crust and the uppermost, rigid portion of the mantle. Together they are called the lithosphere. Earth’s crust comes in 2 “flavors”: oceanic and continental (Table 1.1).

Table 1.1 – Comparison of oceanic and continental crust
Property Oceanic Crust Continental Crust
Thickness 7-10 km 25-80 km
Density 3.0g/ cm3 2.7g/ cm3
Silica (SiO2) Content 50% 60%
Composition Fe, Mg, and Ca silicates K, Na, and Al silicates
Color Dark Light

Lithospheric plates move around the globe in different directions and come in many different shapes and sizes. Their movement rate is millimeters to a few centimeters per year, similar to the rate that your fingernails grow. Motion between tectonic plates can be divergent, convergent, or transform. In divergent boundaries, plates are moving away from each other; in convergent boundaries, plates are moving toward each other; and in transform boundaries, plates are sliding past each other. The type of crust on each plate determines the geologic behavior of the boundary (Figure 1.1).

The six types of plate tectonic boundaries and their motions.
Figure 1.1 – These models show 6 main types of plate tectonic boundaries. Blue indicates ocean, green indicates land, brown indicates the lithosphere, and orange is the asthenosphere. The bold arrows on the plates indicate their relative motion. Also shown are gray volcanoes. Ocean-ocean transform boundaries (not shown) exist on a small scale associated with spreading at mid-ocean ridges, and continent-ocean transform and divergent boundaries are rare (former) or don’t exist (latter). Image credit: Adapted from Wikimedia Commons user Domdomegg, CC BY. 
The foundations of plate tectonics began with a German scientist named Alfred Wegener, who proposed the idea of continental drift in 1915. Think about it, 1915. What kind of evidence could someone possibly have to propose such a big idea? It turns out that Wegener had 4 pieces of evidence that he claimed supported his idea: 1) The continents looked like they fit together like pieces of a puzzle; 2) There were matching fossils on continents that were separated by oceans; 3) There were matching mountain ranges on continents that were separated by oceans; 4) There was paleoclimate evidence that suggested that in the past some continents were closer to the polar regions and some were close to the equator. Wegener took his idea one step further and proposed that all of the continents were together in one giant supercontinent 200 million years ago called Pangea. Like many great ideas in science, Wegener’s idea of continental drift was not accepted by his peers, in part because he did not have a well-developed hypothesis to explain what was causing the continents to drift. It wasn’t until the 1960’s that his idea was expanded upon by scientists like Harry Hess.

Exercise 1.1 – Reconstructing Positions of Continents Using Wegener’s Evidence

When Alfred Wegener came up with his continental drift hypothesis in the early 1900s, he used several lines of evidence to support his idea. He also proposed that 200 million years ago, all continents were together in a single supercontinent called Pangea. In this exercise, you will use the fit of the continents and matching fossil evidence to piece together Pangea. This exercise is adapted from “This Dynamic Planet” by the USGS.

  1. Individually or as a group, piece together the supercontinent Pangea.
    1. Label the landmasses of each continent in Figure 1.2.
    2. Color the fossil areas to match the legend below.
    3. Cut out each of the continents along the edge of the continental shelf (the outermost dark line).
    4. Try to logically piece the continents together so that they form a giant supercontinent.
    5. When you are satisfied with the fit of the continents, discuss the evidence with your classmates and decide if the evidence is compelling or not. Explain your decision and reasoning on the evidence.
  2. Pangea began to break apart about 200 Ma resulting in the formation of the Atlantic Ocean. Using the map in Figure 1.3, calculate the spreading rate of the Mid-Atlantic Ridge in mm/yr. (Hint: measure the distance from the easternmost tip of South America to the inside curve of western Africa).
    ____________________
Symbol Description
Outlines of continents that are surrounded by the continental shelf (stippled pattern) The continents are surrounded by the continental shelf (stippled pattern), which extends beyond the continent until there is a large change in slope.
Fossils of a unique community of plants known as the European ora By about 300 million years ago, a unique community of plants had evolved, known as the European ora. Fossils of these plants are found in Europe and other areas. Color the areas with these fossils yellow.
Fossils of the fern Glossopteris Fossils of the fern Glossopteris have been found in these locations. Color the areas with these fossils green.
Fossil remains of the half meter-long fresh or brackish water (reptile) Mesosaurus Fossil remains of the half-meter-long fresh or brackish water (reptile) Mesosaurus. Mesosaurs flourished in the early Mesozoic Era, about 240 million years ago. Mesosaurs had limbs for swimming but could also walk on land. Other fossil evidence found in rocks along with Mesosaurs indicates that they lived in lakes and coastal bays or estuaries. Color the areas with these fossils blue.
Fossil remains of Cynognathus Fossil remains of Cynognathus, a land reptile approximately 3 meters long that lived during the Early Mesozoic Era about 230 million years ago. It was a weak swimmer. Color the areas with these fossils orange.
Fossil evidence of the Early Mesozoic, land-dwelling reptile Lystrosaurus Fossil evidence of the Early Mesozoic, land-dwelling reptile Lystrosaurus. They reproduced by laying eggs on land. Also, their anatomy suggests that these animals were probably very poor swimmers. Color the areas with these fossils brown.
Five continents with their continental shelves and fossil locations for Exercise 1.1
Figure 1.2 – Continent cut-outs for Exercise 1.1. Image credit: From the USGS, Public Domain.

 

Blank map focusing on South American, Africa, and the South Atlantic Ocean, to be used in Exercise 1.1.
Figure 1.3 – Blank map of the South Atlantic Ocean for Exercise 1.1. Image credit: Daniel Hauptvogel, CC BY-NC-SA.

1.2 Plate Tectonics, Earthquakes, and Volcanoes

Plate tectonic boundaries are often associated with earthquakes and volcanic activity. By looking at maps for the distribution of earthquakes and volcanoes worldwide (Figures 1.4-1.5), you can interpret the boundaries between the major tectonic plates. Generally, divergent plate boundaries are characterized by shallow earthquakes and some volcanism. Convergent boundaries have a range of earthquake depths from shallow to deep, and many have volcanoes as a result of subduction. Subduction occurs in convergent boundaries where the denser, oceanic plate descends into the mantle beneath the overriding plate. Convergent boundaries also tend to produce linear and curved mountain belts. Transform boundaries typically have shallow earthquakes and no volcanoes.

Mercator map of the world showing the locations of volcanoes active in the past 10,000 years
Figure 1.4 – This map shows the location of volcanoes that have been active within the past 10,000 years (red triangles). Map scale reference is 30° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.
Mercator map of the world showing locations of earthquakes from 2015 and 2016.
Figure 1.5 – This map shows the locations of all earthquakes with a magnitude greater than 4.5 for the years 2015 and 2016. The colors indicate earthquake depth; red <35 km, green 35-100 km, and blue >100 km. Please note that many red dots are overlaid by green dots on this map. Map scale reference is 30° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.

Exercise 1.2 – Modern Examples of Plate Tectonic Boundaries

Each type of plate boundary has distinct earthquake and volcanic patterns. Using observational and critical thinking skills, answer the following questions:

  1. Observe the patterns amongst the earthquake and volcano location maps (Figures 1.4-1.5). Hypothesize where you think the major plate boundaries exist and draw those boundaries on the blank map in Figure 1.6 using three different colors to identify the type of motion for each boundary (example: red for divergent boundaries, blue for convergent boundaries, and green for transform boundaries).
  2. Which type of boundary (divergent, convergent, or transform) is the most abundant? ______________________________________
  3. On the same map where you drew in plate boundaries (Figure 1.6), identify locations where each type of these boundaries are located:
    1. Continent-Continent Convergence (CCC)
    2. Ocean-Ocean Convergence (OOC)
    3. Continent-Ocean Convergence (COC)
    4. Continent-Continent Divergence (CCD)
    5. Ocean-Ocean Divergence (OOD)
    6. Continent-Continent Transform (CCT)
  4. What type of plate boundary is associated with most of the deep earthquakes?______________________
  5. Describe the pattern in earthquake depth from the coast to inland at subduction zones.
  6. Critical Thinking: The San Andreas Fault in California is a transform fault. Is there any evidence in the earthquake and volcanic activity that suggests this fault did not always have transform motion? Explain.

 

A blank Mercator map of the world to be used in Exercise 1.2.
Figure 1.6 – This is a blank map of the world to be used in Exercise 1.2. Map scale reference is 30° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.

Earthquake locations can tell you more about an area than what type of plate boundary is there. For example, in subduction zones, most earthquakes occur along the boundary between the subducting slab and the overriding slab. The angle of subduction is not always constant and can vary from one boundary to the next and can even vary along the same boundary. When a plate subducts at a low angle, it is called flat-slab subduction. The effects of flat-slab subduction are many, including shallower earthquakes, uplifting of mountains, and the location and activity of volcanoes.

Exercise 1.3 – Interpreting Subduction Angle from Earthquake Data

The Western margin of South America is a tectonically active region where the Nazca Plate subducts under the South American Plate (Figure 1.7), creating the Andes Mountains. Even though the entire coast is part of the same subduction zone, the subduction process doesn’t look the same throughout. Tables 1.3 and 1.4 contain earthquake data from two different locations of the subduction zone, one from central Chile and another near the Chile-Peru border. The location data are the distance each earthquake was from the trench and how deep within the Earth it was.

  1. Using the graph paper provided by your instructor, plot the distance of the earthquake foci (hypocenters) from the trench on the horizontal axis and the depth of the earthquakes on the vertical axis; the recommended scale is 1 cm = 10 km. Connect the plotted points to create an approximate cross-section of the subduction zone at the two locations.
  2. Look at the graph you made, which region has a steeper subduction angle, the Chile-Peru border or central Chile? ____________________
  3. Partial melting of the asthenosphere above the subducting slab occurs at a certain depth and leads to volcanism. In which location do you think volcanoes are closer to the coastline? Why?
Plate tectonic map of South America and adjacent plates
Figure 1.7 – Plate tectonic map of South America and adjacent plates. Boundaries marked with triangles represent convergent zones. Two arrows in opposing directions indicate divergent boundaries. Transform boundaries have arrows showing motion to both right and left. Red and white colors represent high elevations, greens and yellow represent lower elevations, and purple and blue represent areas below sea level. Image credit: Tectonic boundary map drawn using GPlates software.
Table 1.3 – Earthquake location data from the Chile-Peru Border (data from Martinod et al., 2010)
Distance from trench (km) Depth (km)
160 10
200 30
220 50
300 65
370 125
500 190
300 100
250 65
210 40
280 80
450 175
400 140
410 150
Table 1.4 – Earthquake location data from central Chile (data from Martinod et al., 2010)
Distance from trench (km) Depth (km)
100 10
170 40
220 65
400 90
200 50
120 20
500 110
350 85
300 75
250 60
280 75
200 55
260 90

1.3 Plate Tectonics and Topography

Geologists can observe most of the processes occurring at plate tectonic boundaries today (earthquakes, volcanoes, mountain building, etc.). However, understanding the plate tectonic activity of the geologic past is more difficult because the events have already happened. Hence, geologists use processes that occur in the present to interpret processes that occurred in the past. This is known as uniformitarianism. One way geologists can interpret ancient plate tectonic activity is to look at the topography of an area. Topography is the study of shapes and features of the land surface. When studying features on the seafloor, the topography is instead referred to as bathymetry because this data is referencing how deep a feature is. There are numerous ways of looking at the topography of Earth’s surface, including satellite imagery, topographic maps, shaded relief maps, and digital elevation models.

Exercise 1.4 – Interpreting Plate Boundaries from Topographic Profiles

Below are five topographic profiles showing different plate boundary configurations. A topographic profile is a graph that shows elevation changes as you walk from one point on the Earth to another. These are all made with vertical exaggeration (length/elevation) of 50:1. This overemphasizes the changes in topography. In all of these profiles, the 0 value on the vertical axis is at sea level.

  1. For the topographic profiles in Table 1.4, identify what types of plate boundaries are shown using the names from Figure 1.1. Pay close attention to the y-axis versus x-axis.
  2. On each profile, draw the location of the boundary between the two plates. You can show this as a single line.
  3. For each profile, label features such as oceanic and/or continental crust, mid-ocean ridges, volcanoes, mountain belts, and trenches.
  4. Indicate which direction each tectonic plate is moving (you can use arrows for this).
Table 1.5 – Unknown topographic profiles and answer area for Exercise 1.4
Profile Type of Boundary
First vertically exaggerated topographic profile for Exercise 1.4
Second vertically exaggerated topographic profile for Exercise 1.4
Third vertically exaggerated topographic profile for Exercise 1.4
Fourth vertically exaggerated topographic profile for Exercise 1.4
Fifth vertically exaggerated topographic profile for Exercise 1.4

Geologists can use topography to get a broad sense of the tectonic history of an area. Generally speaking, plate tectonic activity tends to produce elevation changes at or near the plate boundary, especially in convergent settings. The collision of two plates leads to suturing; the two plates become one when the collision ends. Evidence of these ancient boundaries is most commonly in the form of linear mountain belts that are not currently near a plate tectonic boundary. For example, an eroded, linear mountain belt in the middle of a continent would indicate that area was part of a convergent boundary deep in the geologic past and likely a continent-continent collision. The Ural Mountains in Russia fit this description (Figure 1.8). They formed during an orogeny 240 to 300 million years ago and now serve as the boundary between Europe and Asia.

Shaded relief map of the Ural Mountains in Russia.
Figure 1.8 – Shaded relief map of the Ural Mountains in Russia. Red and white colors represent high elevations, greens and yellow represent lower elevation, and purple and blue represent areas below sea level. The Ural Mountains are a narrow, linear chain of mountains that trend north-south through Russia. Map scale reference is 60° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.

Exercise 1.5 – Interpreting Ancient Plate Tectonic Boundaries

  1. Over time mountain ranges are weathered and eroded, and the topography slowly goes back to base level. Which do you think is more likely to be older, a mountain belt with higher elevations or a mountain belt with lower elevations? Explain your reasoning.
  2. Look at the topographic map for part of North America (Figure 1.9). Mark two areas that you think have been through major convergence of tectonic plates.
  3. Which of the two areas do you think is older? What evidence from the map supports your hypothesis?
  4. Look closely at the western portion of the North American continent. You should be able to notice differences in the patterns that make up the mountains. Each pattern represents a different geologic region. Draw boundaries on the map that separate these different geologic regions and then describe the patterns you observed to distinguish them (Hint: There are at least three).
  5. Tectonic plate activity is often associated with mountain building. Based on Australia’s topography (Figure 1.10), explain whether or not you think the region is tectonically active today?
  6. On the topographic map of Australia (Figure 1.10), mark an area that you think was a plate boundary in the geologic past but is no longer active today. Explain your reasoning for marking this area.
  7. Critical Thinking: Both of these maps contain areas on continents that are below sea level. Come up with a hypothesis that explains how this can happen.
Shaded relief map of the United States as well as some of Mexico and Canada.
Figure 1.9 – Shaded relief map of the United States. Red and white colors represent high elevations, greens and yellow represent lower elevation, and purple and blue represent areas below sea level. Map scale reference is 40° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.
Shaded relief map of Australia.
Figure 1.10 – Shaded relief map of Australia. Red and white colors represent high elevations, greens and yellow represent lower elevations, and purple and blue represent areas below sea level. Map scale reference is -20° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.

When most people think about tectonic plate boundaries, they often visualize parallel, symmetric lines separating the plates. This is not always the case in the real world as many plate boundaries are curved or segmented; this is because Earth is a sphere. Think about this: if you had a ball and tried to wrap it with a flat sheet of paper, would the paper wrap around it perfectly smooth? The answer is no; the paper will want to fold in some places and tear in other places. The tectonic plates behave similarly to the paper. Of course, other factors affect the shape of a boundary. Evidence of these plate boundaries is also contained in the topography of continents because not all mountain belts are straight lines.

Exercise 1.6 – Ancient Plate Boundaries in Texas, Oklahoma, New Mexico, and Northeastern Mexico

Below is a topographic map of Texas, Oklahoma, New Mexico, and northeastern Mexico (Figure 1.11). This area is not near an active plate tectonic boundary today; the closest boundary is in the Gulf of Mexico. However, there is evidence in this topography to indicate it was part of a plate tectonic boundary at least twice in the geologic past.

  1. Based on the topography, mark two areas that have been part of a plate tectonic boundary in the geologic past. Topographic changes do not need to be symmetric as some tectonic processes are not symmetric.
  2. One of these boundaries is older than the other. Label the old and young boundaries.
  3. One of these boundaries has highs and lows within the belt. What tectonic process creates low topography?
  4. One of these boundaries splits into two branches. What is the angle between these branches?
Shaded relief map of Texas.
Figure 1.11 – Shaded relief map of Texas. Red and white colors represent high elevations, greens and yellow represent lower elevations, and purple and blue represent areas below sea level. Map scale reference is 30° latitude. Image credit: Daniel Hauptvogel, CC BY-NC-SA.

As tectonic plates move, they ride over stationary “hotspots” of heat from the mantle. Hotspots are still a poorly understood geologic phenomenon, but they allow extremely hot mantle material to rise close to the surface. Hotspots are marked by volcanoes, which come from melting of the mantle and crust directly above a hotspot. If they occur under oceanic crust, they produce basalts. On the other hand, if they are under continental crust, they form both basalts and rhyolites, often called bimodal volcanism. Under North America, there are two hotspots: The Yellowstone hotspot, which is currently under Yellowstone National Park in Wyoming and Montana, and the Anahim hotspot in central British Columbia, Canada. As the North American Plate moves over these hotspots, calderas form from volcanic activity; one of the largest volcanic eruptions ever occurred when the Gray’s Landing volcanics erupted 8.72 million years ago above the Yellowstone hotspot. One of the controversies is whether the hot spot is still capable of supereruptions or whether the volume of eruptive material is waning.

Shaded relief map for the northwestern United States and southwestern Canada showing locations of hotspot eruptions from two mantle plumes.
Figure 1.12. – A topographic map for the northwestern United States and southwestern Canada. Superimposed is the distribution of volcanic activity (black areas) for both the Anahim (northern chain of volcanoes and plutons) and Yellowstone (southern chain of volcanoes). These chains of volcanoes are called hotspot tracks. Next to each volcanic area is the age of the initial volcanism in millions of years. Some of these locations have more than one caldera; these overlap in space and time. Red and white colors represent high elevations, greens and yellow represent lower elevation, and purple and blue represent areas below sea level. Map scale reference is 45° latitude. Image credit: Virginia Sisson and Daniel Hauptvogel, CC BY-NC-SA. Location of volcanic centers adapted from Wikimedia Commons Sémhur CC BY-SA for the Anahim hotspot and Kelvin Case CC BY for the Yellowstone hotspot.

Exercise 1.7 – Tracking North American Hotspots

Use Figure 1.12 to answer the following questions about North American hotspots.

  1. Use a protractor to measure the direction of the plate motion for each hotspot track. This is called the azimuth and is usually measured clockwise from the north.
    1. Angle for Yellowstone: ____________________
    2. Angle for Anahim: ____________________
  2. How fast is the North American plate moving over these hotspots? Measure the length of the hotspot eruptions from the youngest to oldest. If you divide the length by the maximum age, this will give you the rate of plate motion. Convert this to mm/year (km/my) as most plate motions are low-velocity rates.
    1. Rate of plate motion for Yellowstone: ____________________
    2. Rate of plate motion for Anahim: ____________________
    3. Are these the same for the two hotspots? ____________________
    4. If not, why are the azimuth and the rates different if North America is a rigid plate tectonic block?

      The answer may not be apparent as we don’t often move things around on a sphere. Instead, we think of motion as a straight line from point a to point b. These hotspots are on the North American plate which means the plate rotates around a point in the middle of northern Quebec. Since they rotate around a point on a sphere, different locations on the plate move at dissimilar speeds and directions. Geoscientists call this an Euler pole.

  3. Geoscientists have measured instantaneous global plate motions through various techniques such as global positioning satellites (GPS) and very-long baseline interferometry (VLBI). This data is used to calculate the rates of motion between two plates. There are several online plate motion calculators available; we will use the one created by UNAVCO. Use the latitude and longitude for the young end of each hotspot and calculate the rate and direction of plate motion. Fill this out in Table 1.6. This website will give you other information that is not relevant to this lab exercise.
    Table 1.6 – Answer area for Exercise 1.7c
    Hotspot Speed (mm/yr) Azimuth Direction
    Yellowstone
    Anahim
  4. Critical Thinking: Are the UNAVCO results similar to your calculated results from b? If not, why might you get different answers?
  5. Has the rate of motion of the North American plate been constant along the hotspot track?
  6. Which hotspot track has more volcanism? Yellowstone or Anahim? Be sure to compare the volcanism over the same time period. Consider the size of the calderas when you answer this question.
  7. Critical Thinking: Can you explain why one of these has larger volcanic eruptions? You may be able to use the topography to help you understand each area’s tectonic history to help you answer this question.

Additional Information

Exercise Contributions

Daniel Hauptvogel, Virginia Sisson, Carlos Andrade, Melissa Hansen

References

Knott, T.R., Branney, M.J., Reichow, M.K., Finn, D.R., Tapster, S., and Coe, R.S., 2020, Discovery of two new super-eruptions from the Yellowstone hotspot track (USA) Is the Yellowstone hotspot waning? Geology, v. 48, p. 934-938. doi.org/10.1130/G47384.1 

Martinod, J.,  Husson, L., Roperch, P., Guillaume, B., and Espurt, N., 2010, Horizontal subduction zones, convergence velocity and the building of the Andes. Earth and Planetary Science Letters, v. 299, pp. 299-309. DOI:10.1016/j.epsl.2010.09.010.

Google Earth Locations

Click or scan to view all chapter 1 locations on Google Earth

definition

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

The Story of Earth: An Observational Guide Copyright © by Daniel Hauptvogel & Virginia Sisson is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.

Share This Book